﻿The range of brightness adjustment is limited to the range between the configured minimum brightness and maximum brightness. This parameter defines the behaviour when the range limits are reached.

*Stop sequence*: The brightness sequence is automatically stopped after reaching the range limits.

*Reverse direction and continue sequence*: After reaching the range limits, the brightness sequence is automatically continued in opposite direction until it is stopped by the communication object.

*Visualise, reverse direction and continue sequence*: When the range limits are reached, a short visualisation is carried out by the lamp and the sequence is then continued in the opposite direction. Visual feedback is provided by briefly switching the assigned DALI operating devices off and on again. The time between OFF and ON is invariably 1 second. No status telegrams are generated by the short switching process.
